Set for connecting to a gas cylinder, 30 mbar reducer, 150 cm hose and fitting

Set for connecting to a gas cylinder with a GOK 30 mbar reducer

What is the kit for?

Enders gas grills and heaters usually come with everything needed to connect to the gas cylinder, including a hose and reducer. However, if you have gas appliances from other manufacturers that are not equipped with a reducer and hose, you will need a kit for connecting to a gas cylinder.

It is included in the kit:

• The GOK 30 mbar reducer is a universal pressure stabilizer that reduces the gas pressure from the cylinder to the level required for the operation of gas equipment.
• Gas supply hose - connects the reducer to the gas appliance.
• Clamps - for reliable fastening of the hose to the reducer and gas appliance.
• Threaded fitting - for connecting the hose to the gas cylinder.

How to use the set:

1. Connect the reducer to the gas cylinder.
2. Connect the hose to the reducer and gas appliance.
3. Attach the clamps to the hoses.
4. Open the valve on the gas cylinder.
5. Make sure there are no gas leaks at the connections.

Important:

• Before purchasing a kit, make sure that the reducer matches the required pressure of your gas appliance.
• Carefully follow the manufacturer's instructions when connecting the kit to a gas cylinder and gas appliance.
• Do not use the kit if it is damaged.

Price:

The price of kits for connecting to a gas cylinder depends on the manufacturer, model and configuration.