Set for connecting to a gas cylinder, 30 mbar reducer and 80 cm hose

Enders gas grills and heaters are always equipped with everything necessary for the most simple installation, including a hose and a reducer (pressure regulator). Thus, for the operation of Enders gas equipment, you only need a filled gas cylinder. And for customers who have gas equipment from other manufacturers, not equipped with a reducer and hose, we have kits for connecting it to gas cylinders. A reducer for a gas cylinder is a universal pressure stabilizer that is an indispensable part of gas equipment. The pressure at the outlet of the gas cylinder is not normalized and depends on various factors, therefore there is a reducer (gas pressure regulator) between the gas equipment and the gas cylinder connected by a gas hose. Most gas devices operate at a fixed pressure, and in order for the gas pressure at the outlet of the cylinder to correspond to the pressure at the inlet, the device includes a gas reducer that reduces the pressure to the required level. The installation process takes place without particular difficulties with the help of clamps included in the kit. The reducer has an output pressure level of 30 mbar. It is important that the output pressure of the reducer corresponds to the required pressure of the gas appliance, which is usually described in the technical documentation supplied with the equipment. In any case, we advise you to consult with our specialists before buying.