Gas hose 80 cm for clamp, GOK 50 mbar reducer (SHELL connection type), 1/4", fitting Ø9 mm, set

Kit: gas hose 80 cm under the collar, reducer GOK 50 mbar, 1/4", fitting Ø9 mm under the collar x 1/4", herringbone fitting Ø10 mm, external thread 1/2", reinforcement collars. Gas grills and heaters produced by the Enders company are always equipped with everything necessary for the most simple installation, including a hose and a reducer (pressure regulator). Thus, for the operation of Enders gas equipment, you only need a filled gas cylinder. , not equipped with a reducer and a hose, we have sets to connect it to gas cylinders. A reducer for a gas cylinder is a universal pressure stabilizer, it is an indispensable part of gas equipment. The equipment and a gas cylinder connected by a gas hose include a reducer (gas pressure regulator). Most gas appliances work at a fixed pressure and for in order for the pressure of the gas at the outlet of the cylinder to correspond to the pressure at the entrance to the device, a gas reducer is used, which reduces the pressure to the required level. The set is also equipped with a threaded fitting. The reducer has an output pressure level of 50 mbar. It is important that the output pressure of the reducer corresponds to the required pressure of the gas appliance, which is usually described in the technical documentation supplied with the equipment. In any case, we advise you to consult with our specialists before buying.